Ready to tackle your shower drain? At Delex Plumbing, we make it simple. Installing shower drain plumbing takes a few steps. Follow along, and you’ll have water flowing right in no time. Let’s learn How to install shower drain plumbing!
Why Get It Right?
A good drain keeps your shower working. Poor setup causes leaks or clogs. Plus, it saves you from pricey fixes later. So, let’s get started with the process.
Check out plumbing services here!
Tools and Stuff You’ll Need
Gather your gear first. You’ll need a shower drain kit, PVC pipe, a pipe cutter, and primer. Also, grab cement glue, a wrench, and a level. Got everything? Great. Delex Plumbing suggests double-checking before you start.
Step 1: Prep the Area
Start with a clean slate. Clear the shower base. Mark where the drain goes—centre it under the showerhead. Next, cut the floor if needed. Make sure it fits the drain pipe. A smooth start sets you up well.
Step 2: Set the Drain Base
Now, install the drain base. Dry-fit it into the hole first. Check with a level—it must sit flat. Then, glue it to the floor with the plumber’s putty. Press firm. This keeps water out. Let it dry a bit.
Check out plumbing services in Mississauga HERE!
Step 3: Connect the Pipes
Time for plumbing. Cut PVC pipe to reach your main drain line. Use the pipe cutter for clean edges. Next, apply primer to the pipe ends. Follow with cement glue. Attach the pipe to the drain base and main line. Hold it tight for 30 seconds. Solid connections matter!
Step 4: Test the Fit
Don’t skip this. Pour water down the drain. Watch for leaks. Also, check the slope—water should flow fast. No drips? Perfect. If it leaks, tighten or re-glue. Delex Plumbing says testing saves headaches.
Step 5: Finish Up
Almost done! Add the drain cover. Screw it in snug with a wrench. Then, seal around the base with silicone. This stops water from sneaking through. Let it cure for 24 hours. After that, your shower’s ready.
Tips for Success
Want it perfect? Measure twice before cutting. Keep pipes sloped—about a quarter-inch per foot. Also, wear gloves—glue’s messy. Stuck? Delex Plumbing’s pros can jump in.
Read more: Plumbers
Final Thoughts
So, How to install shower drain plumbing? Prep, set, connect, test, and finish. It’s straightforward with the right steps. At Delex Plumbing, we’re here if you need help. Call us today!
