Hydro Jetting vs Drain Snaking
Hydro jetting and drain snaking are two powerful methods for clearing clogs—one uses high-pressure water, the other a mechanical snake—for different levels of blockage.
Homeowners suffer due to a drain system failure. That is why they should be familiar with the methods of drain cleaning to understand better and make informed decisions. In this way, they can maintain the health and cleanliness of their home’s drainage system with a professional approach. There are two primary techniques employed to clean a clogged drain. Both approaches differ in their effectiveness and cost. Let’s take an in-depth look at these techniques: Hydro jetting vs drain snaking. Hydro Jetting employs high-pressure water to remove clogs, whereas drain snaking uses a metal rod to remove blockages.
A Comparison Between Hydro Jetting and Snaking a Drain?
Both techniques are altogether different. In hydro jetting, water is applied with high pressure to break the blockage. While in snaking, a flexible metal is used to remove the blockage. The professional who is an expert and knows how every base point works in the drain system can perform cleaning tasks similarly to how a plumber knows how to plumb a shower base.
How do These Techniques Work
Snaking
In hydro jetting vs drain snaking, one is using a snake. In this technique, a metal cable, known as an auger, is used. This cable is flexible. Snaking is also known as augering after the metal cable. This cable is inserted into the drain pipe mechanically. During its movement in the pipe, it rotates and breaks the clog or blockage formed of hair or other such material that can combine to form a clog or blockage. Minor blockages are tasked to professionals in larger drain installations, such as shower drain plumbing installation at the toilet level, to plumbers.
Hydro Jetting
In hydro jetting vs drain snaking, the other technique is hydro jetting. In this technology, a high-pressure water stream is applied into the drain pipe. Approximately 4,000 PSI pressure is applied to water through a nozzle connected to a hose. This high-pressure hydro jet breaks the clog and washes the walls of the pipes with the help of water pressure. This pressure jetting is more efficient than snaking. How to get through stubborn blockage is known as a professional; how to install shower drain is known as a plumber.
Assessing the Suitability of Both Methods for Blockage Clearing
In hydro jetting vs drain snaking, choosing one of these methods requires expertise or good information about the blockage. Since faucet repair milton requires cost, a drain system blockage removal is also costly. The best option is to consult a professional. Taking decisions based on your criteria is helpful.
When To Opt for Snacking
Snaking is the best option for a minor to moderate level of blockage. Another point is to know the constituents of the blockage. If these constituents are food remnants, hair, soap scum, or grease that have formed into blocks, it is acceptable to use the snaking technique.
When Hydro Jetting Is the Best
Stubborn blockage and recurring clogging always require proper cleaning. This cleaning is performed through hydrojetting. Because the snake started to drain, but it got stuck again. So the best option for a long-term solution is hydro jet cleaning. The blockage ingredients, grease buildup, mineral deposits, and even tree root intrusion can be removed with hydro jetting. Drain cleaning Mississauga is not a novice job. That is why cleaning should be done professionally by employing suitable techniques.
Evaluation of the Pros and Cons of Both The Methods
In hydro jetting versus drain snaking, each technique has its pros and cons. For a better understanding of the pros and cons, we have yardsticks to measure them. household plumbers evaluate each method on the following factors:
Cost Comparison
One of the most important factors is the cost. The cost of each technique is different. Snaking is a method available at lower rates. It ranges from $100 to a few hundred dollars. The professional of this technique is a typical plumber. Plumbers in household categories are easily accessible to homeowners.
The hydro jetting is a costly technique. It indeed gives a long-term solution to cleaning the drain system. But it is costly too. Its cost is manifold than that of the snake. It may start from three hundred dollars to multiples of three hundred dollars.
Safety and Damage Point of View
Hydro Jetting vs Drain Snaking – Both cleaning methods involve safety and damage issues. Snaking is a safer option. It can avoid damage to old pipes made of clay or PVC. However, snaking or augering driving by logic and application of the mind is safe. Any aggressive move can be damaging to the drain system, even in snaking. Hydro jetting could be more damaging as it involves force or pressure that can break an already clogged or fragile pipe. The best option is to consult a professional or expert before making a decision.
Ease and speed of use
Ease and speed of use also matter. Snaking can be performed within an hour or some more time if the clog is not straightforward. In contrast, hydro jetting takes more time to bring and establish the setup. Further, it also requires a professional assessment before applying this method. This all takes time. So, snaking is more straightforward and speedier.
Environmental impact
Today, we are more aware of the importance of Mother Earth and its environment. In this process, no chemicals are used to remove the clog during the snaking. So it’s safe for the environment. Hydro jetting also employs only water, with no chemicals. Therefore, it is also acceptable from an environmental perspective.
Your Path to Ensure Better Drainage With Deluxe Plumbing & Drain
Hydro jetting vs drain snaking – the best option for you is to contact us. Our professionals are highly competent and possess extensive experience. They will guide you to better decisions. And transform your drain system into a healthy and long-lasting one.
Conclusion
Hydro jetting vs snaking are techniques used for removing clogs or blockages. In hydro jetting, water with high pressure is used to clean the drain system. On the contrary, in snaking, flexible metal is used.
