Planning a renovation or construction? Then, you cannot forget about the installation of a shower drain. It helps in effective water drainage and prevents leaks or water damage. Choosing a suitable shower drain is possible when you know about the shower base drain and pipe type in your house. How to install shower drain? It’s a simple procedure when you follow all the rules and steps.
How To Install Shower Drain Plumbing? Five Steps To Complete The Installation!
The following are the details to learn how to install shower drain.
Shower Base And Subfloor Preparation
You must ensure the drain assembly is compatible with your shower pan or tile base. Use tools and materials that are approved under Canadian plumbing codes. Where do you want to install the shower base? Inspect and clean that area thoroughly. For a tile shower, confirm your subfloor is equal, sturdy, and resists moisture. Confirm your drain hole’s location for a prefabricated shower pan.
Replacement Of The Old Drain
Use a wrench or cutting tool while replacing the old drain. It helps in removing the existing assembly carefully. Consider the condition of the subfloor and replace any damaged sections before proceeding.
Position And Installation Of The Drain Pipe
You must measure and cut the drain pipe to the accurate length. Make sure it aligns with the shower drain outlet. Dry-fit the pieces to ensure proper alignment. Check carefully for any cracking pipe before final assembly. Once everything fits, apply primer to the pipe and fittings (for PVC or ABS pipes), followed by cement, and connect them firmly. Do you need any services for your hydro jet drain cleaner?
Attachment Of The Shower Drain Assembly
The drain installation procedure can differ according to your shower type.
For Tiled Showers
Use a three-piece or clamping ring drain. Place the bottom flange over the drainpipe and secure it to the subfloor. Apply a waterproof membrane and clamp it in place before adding the final strainer piece.
For Prefabricated Shower Bases
Insert the drain body through the hole in the base. Apply a bead of plumber’s putty or silicone sealant around the underside of the flange. Press the drain body into place and tighten the locking nut underneath using a wrench. Ensure a watertight seal is formed.
Let the sealant or putty cure as per the manufacturer’s instructions.
Test The Installation For Leaks
Test the drains for leaks before enclosing the area or tiling over. Pour water into the drain and check all connections, especially underneath, to ensure there are no drips or moisture buildup. If you detect any leaks, tighten connections and then reseal if necessary. You must address such issues at this stage rather than making them worse and affecting your shower experience later. This step is just as crucial as tasks like leaking tap repair to ensure a watertight and fully functional bathroom setup.
Final Touch Ups And Clean Up
How to install a shower drain pipe ? Finish the installation of the shower base or tile after the system passes the leak test. You can trim any excess pipe if needed. Ensure the strainer is flush with the finished surface. Remove all leftover sealants and debris. You must dispose of any waste materials carefully. Then, clean and restore your tools.
People also search for details related to the commercial drain cleaner.
Conclusion
To conclude, how to install shower drain? You need to understand various plumbing standards and measures for this purpose. Although DIY users can complete this procedure, it’s best to approach a professional plumber for this task. He can help with complicated installations and connections to the existing systems.